Finding the best gas pole saw can be a challenging task. This is because there are many different makes and models in the market today. You can choose from Japanese, European, Korean and other brands. Choosing a particular brand can cost a great deal. There are also a lot of features that you have to choose from. To help you find the best kind of gas pole saw and all the features that you should look for, read this article and other buying guides.
First, determine the size and type of the tree you will cut. It is important to determine the size of your tree so you can choose the ideal gas pole saw size. If you’re in a rush, try out the comparison chart to discover the best gas pole saw on the market. The longer the pole is, the more difficult it is going to be to cut the tree.
Also consider the type of cutting wheel you will use. The two most common wheels are the circular spinning wheel and a tapered wheel. A wheel with a tapered surface cuts a circular path when cutting. This type is perfect for cutting thicker tree branches. However, a circular wheel tends to wear down faster than a tapered one.
Another important factor is the level of power you need. A manual pole saw has a motor that delivers a more powerful kick to increase the amount of speed. This increased speed enables the operator to cut through thicker branches and longer pieces of wood faster. An automatic saw, on the other hand, has no motor but relies on its operator to push or pull a trigger to start the mechanism. The trigger activates the motor and transfers the energy into the blade for cutting through the wood.
Also consider the type of fence, the gas pole saw will be used on. The best gas pole saws come with either a vinyl fence or a steel bar. Vinyl fences are more affordable and allow the operator to control the depth of the cut. Steel bars, on the other hand, provide a more accurate, heavier-duty cutting surface.
Consider also the type of gas tank that comes with the gas pole saw. Gasoline fuel is available in three different sizes: small, medium, and large. If you plan to buy a cordless electric saw, you can get a larger gas tank. However, if you’re looking to purchase a gas pole saw with a cord, you should go with the small size. That way, you will be able to cut longer pieces of wood without having to worry about running out of gas.
You should also understand how the law works. A typical gas pole saw consists of a blade attached to a motor. The blade rotates at high speeds and cuts through the wood and branches. It uses a combination of gravity and air pressure to cut branches and it is this action that produces the cutting circular motion.
Although gas pole saws make most types of cutting faster and easier, there are some downsides to using them as well. The biggest issue is noise. Gas saws generate a lot of noise as they rotate. This can be distracting and annoying to other people in the vicinity. It is best to store them in places where they will be out of the way when not in use.
Another issue with gas pole saws is that they require regular maintenance. Like any mechanical device, their parts wear out over time. Even the motor may start to have problems. These issues can be prevented by paying attention to the proper maintenance. Every use of the tool requires that the blade is sharpened and replaced on a regular basis. If you don’t bother to do this, the blade may eventually break.
Gas powered tools produce more noise than electric ones and they require you to manually control the speed at which they cut. The noise created from an electric tool is mainly due to the cutting vibrations and more recently, because of the batteries being drained quicker. Gas-powered tools are a good deal quieter because of the stronger motor, and they tend to last longer than an electric model. But, they require more maintenance, are less portable, and take up more space.
The main issue with gas engine pole saws is that they cut too fast and generate much more noise. This may be OK for cutting small branches and a few limbs in a wood pile, but it certainly isn’t good enough for cutting thick branches and tree trunks. You won’t be able to get into the tree with such a machine and you may damage the limbs if you cut them in the wrong direction. It’s better to spend the extra money and buy a cordless version, unless you’re going to use it every day.